Daha önce arduino shield (modül) leri hakkında yazı dizimize başlamıştık:
Arduino Shield (modül) Listesi 1
Arduino Shield (modül) Listesi 2
Bugün konumuza kaldığımız yerden devam edeceğiz. Elimizden geldiğince arduino modülüyle ilgili açıklamalar yapmaya çalışıyoruz. Zaten üreticiyi de paylaştığımızdan ilgilendiğiniz arduino modülüyle ilgili daha ayrıntılı bilgiye kolaylıkla ulaşabilirsiniz.
Chesters Garage Power LED Shield
Bu modül ile power ledleri sürebilirsiniz. (Ledler 1W ve üstü olabilir.) PWM ile parlaklık kontrol, her kanalın ayrı ayrı akımlarının ayarlanabilmesi gibi özelliklere sahip.
- 4 individually addressable channels.
- Each channel adjustable ~50mA to 1000 mA.
- 1 to 6 LEDs per channel (more if you run strings in parallel)
- Any combination of LED colors.
- Full opto-isolation to protect the Arduino.
- 5V regulator to power the Arduino from the shield.
- Drives 85 Watts of LEDs from one shield (6 LEDs x 3.6V x 1000 mA x 4 channels)
- Stackable (estimated up to 8 shields can be stacked)
- Minimum input voltage: 6 VDC.
- Maximum input voltage: 32 VDC.
Chips To Bits Storage Shield
Storage Shield ile depolama yapabilirsiniz. FAT formatında SD kart içinde depolama yapabilirsiniz. Bunun anlamı PC ile kart okuyucu ile depoladığınız veriyi görebilirsiniz demek.
Features:
- Low memory overhead on the Arduino board.
- Support for FAT12, FAT16, and FAT32.
- Support for 8.3 format (LFN is not supported)
- Direct disk access (Not fully implemented)
- Embedded real time clock using a DS1307 real time clock.
- Provides accurate timestamps on files.
3.2″ Touchscreen Shield
Tags:lcd, touch, sd, flash, storage, rtc
Maker: Circuit Ideas Design
Display time logger application shield.
- TFT LCD 3.2″ touch screen.
- SD card slot.
- RTC I2C DS1307.
USB Host Shield
Shield URL:USB Host Shield
Tags:
Maker:Circuits At Home
This shield adds USB Host capabilities to the Arduino. Comes in four different configurations. Software support for new devices is constantly added; at the moment, code for USB keyboard and PS3 controller are ready with Bluetooth and digital cameras in the works.
DTMF Shield
Ses girişinden alınan DTMF tonlarını çözmek için kullanılıyor. Radyo üzerinden arduino ile cihazları kontrol etmek için kullanılabilir.
Shield URL:DTMF Shield
Tags:dtmf, audio, input
Maker:Collin Schulz
DOGS102 LCD Shield
Shield URL:DOGS102 LCD Shield
Tags:lcd, display, output
Maker:Control Connection
LCD shield based on DOGS102W display from Electronic Assembly:
- 102×64 monocrome resolution with Amber backlight.
- 3.3V SPI interface with CD4050 buffer.
- SMD componens mounted on the back.
- Optional 5V to 3.3V regulator and PWM backlight control.
- 4 buttons for easy menu navigation.
Accelerometer Shield
Shield URL:Accelerometer Shield
Tags:
Maker:Critical Velocity
Integrates an Analog Devices ADXL335 3-axis accelerometer into an Arduino compatible shield. 3 analog outputs for the X,Y and Z axes. +/3 g range per axis.
- 3 Axis Acceleration, +/- 3g sensing range per channel.
- 6 PWM Servo output headers.
- Prototyping space.
- 8 and 6 pin shield extender headers and regular headers included.
- Reset button included.
IMU Shield, 6 DOF Accel/Gyro
Shield URL:IMU Shield, 6 DOF Accel/Gyro
Tags:
Maker:Critical Velocity
The Critical Velocity IMU (Inertial Measurement Unit) Shield provides 6 degrees of freedom – X, Y, Z acceleration, and angular yaw, pitch and roll rate sensing.
Full scale accelerometer range is +/- 3 g, and the gyroscope has a selectable range of +/- 300 deg/sec or +/ 1200 deg/sec.
- 6 Degrees of Freedom – 3 Axis Acceleration and 3 Axis Gyro.
- Digitally selectable gyroscope sensitivity – 300 or 1200 deg/sec.
- Digitally selectable gyroscope reference voltage measurement.
- Shield stacking headers and regular headers included.
- Uses Analog Devices ADXL335 3-axis accelerometer.
- Uses ST Microelectronics LY530AL and LPR530AL Gyroscopes.
32 Channel Analog Multiplexer Shield
Shield URL:MonsterMux 32 Channel Analog Multiplexer Shield
Tags:analog, input
Maker:Critical Velocity
The MonsterMux32 Arduino-Compatible Shield Kit allows you to connect up to 32 analog channels into a single analog input pin on the Arduino board. 6 digital pins control which input is connected to the Arduino.
- 32 Analog channels.
- 36 rising-clamp terminal block pins.
Terminal Block Shield
Shield URL:Terminal Block Shield
Tags:breakout
Maker:Critical Velocity
Breaks out each pin into its own high quality rising-clamp terminal block connector for easy hookup to external devices. 30 terminal connections in total.
FM Radio Shield
Shield URL:FM Radio Shield
Tags:fm, radio, receiver
Maker:Curious Inventor
FM receiver that allows you to control the station digitally, read signal strength, and obtain RDS info including artist, song, and station call-sign.
- Ultra clear audio due to onboard DSP signal conditioning.
- RDS station info.
- Measure the signal strength to find strongest or weakest stations. Good for finding an empty band for your FM transmitter, or auto-programming your radio in a new location.
- Includes amplifier for headphones.
- Antenna connection point available, uses headphone wire for antenna by default.
- Change Volume / Station with buttons or Serial USB commands.
Li-Ion Battery Shield
Shield URL:Li-Ion Battery Shield
Tags:battery, charge, power
Maker:CuteDigi
This shield is used to provide a rechargable battery pack for the Arduino.
The mini-USB port is used to charge a Li-Ion or Lo-Ion poly battery. There are LEDs showing the charge status.
6 big mounting holes can help you easily fix the battery pack.
For a 600mAH battery, it takes about half hour to charge.
Quad-band GPRS/GSM Shield
Shield URL:Quad-band GPRS/GSM Shield
Tags:gprs, gsm, communication
Maker:CuteDigi
This is an Arduino Shield for SM5100 quad-band GSM/GPRS module. The module is included.
RS232 Shield
Shield URL:RS232 Shield
Tags:serial, communications
Maker:CuteDigi
Adds an RS232 serial port to your Arduino.
Not: Arduino modülleri yazı dizimiz devam edecek. Yazımızdan faydalandıysanız bir teşekkürü çok görmeyiniz lütfen.
Güzel liste. Teşekkür ederiz.
Arduino modülleri listelerinin devamını bekliyoruz.
Arduino kullanmaya mı başlasak acaba? İnsanın canı çekiyor.
merhabalar. size teşekkür ederim bu yazdığınız değerli bilgiler için.
mekatronik 1.sınıf ögrencisiyim son 1 haftadır hergün bir yeni bilgi öğrenmek icin bu siteye giriş yapıyorum ve buradan çıkmak benim için baya zor oluyor harika şeyler öğrendim.
Değerli yorumlarınız için teşekkürler arkadaşlar.